Die Cutting

We have over 25 years of experience in die cutting— Whether you require thousands of parts or just a few we can be your cost effective provider.

Commonly Used Material

  • Sheet Rubber
  • Conveyor Belting
  • Fabric
  • PVC
  • Urethane
  • Pure Gum Rubber

OEM Equipment Parts – Made to requirements—could include:

  • Skirtings
  • Flashings
  • Gaskets
  • Flaps



Training and Preventative Maintenance Tools

Training Station


Click on image to zoom

Displayed is a customized Lubrication Station. This station is built on a stainless steel frame with heavy duty casters. The station includes:

  • SEW Eurodrive Inline Helical Reducer Cutaway
  • Baldor/Dodge Quantis Inline Helical Gear Reducer
  • Baldor/Dodge 2-Bolt Pillow Block Bearings
  • Baldor/Dodge Tigear-2 Right Angle Worm Gear Reducer
  • Single Point Lubricator
  • Chain Brush Oiler
  • Visual Lubrication Manifolds and Lubrication Lines
  • Machine Specific Application Lubrication Demonstration
  • Lubriplate Reference Chart for Lubricants


Click on image to zoom

Also displayed is a clear acrylic gear box – created for visual inspection of the gearing lubrication inside a standard gearbox, and the cut-aways of the Baldor/Dodge bearings and the SEW Eurodrive Reducer.

This display is just one of any number of variations on a training station.

For further information, please feel free to give us a call 800.952.5072 or send us an email

Electrical/Mechanical Drive Repair & Restoration
We service more than just Gear Reducers

Repair Specialists In The Following Areas:

Gear Reducers
Gear Motors
Shaft Accommodations
Horton Clutches
Centrifugal Pumps
Positive Displacement Pumps

Screen Shot 2015-12-08 at 10.03.46 AM
Screen Shot 2015-12-08 at 10.03.54 AM

Screen Shot 2015-12-07 at 2.29.22 PM

Click here to download PDF

Engineering Services


  • Automotive
  • Bottling & Beverage
  • Dewatering Systems
  • Food Processing
  • Foundry
  • Furniture Industry
  • HVAC
  • Life Sciences
  • Wood Processing


Initial Engineering

  • Feasibility Studies
  • Cost Analysis

Detailed Engineering

  • Component Selection
  • Sub Assembly
  • Integration

Detailed Drawings

  • Manufacturing Drawings
  • Work Instructions


  1. Lean Cell Retrofit
  2. Automotive Brake Rotor Balancing System
  3. Automated Glue Dispensing Cell
  4. Automated Yogurt Press

Lean Cell Retrofit

  • Scope: Reverse engineer and design retrofit of 30 existing lean cells
  • Purpose: Retrofit of leans cells to standardize across the production line
  • Drives: Lesson Motor, KEB drive clutch
  • Controls: Allen-Bradley Controllogix
  • Rate: Up to 1000 units an hour


Automotive Brake Rotor Balancing System

  • Scope: Design and spec testing balance unit for automotive brake rotors for US based automotive company
  • Purpose: Testing and correction of imbalance of brake rotors coming from production line
  • Drives: Allen-Bradley Servos
  • Controls: Allen-Bradley Controllogix Rate: Up to 45 units an hour


Automated Glue Dispensing System

  • Scope:  Design, spec, build, and install automated glue dispensing system for German based company
  • Purpose: The dispensing of two part epoxy in precise locations on plastic glides in 3 and 4-axis
  • Drives:  Leadshine drivers
  • Controls: LinuxCNC
  • Rate: Up to 100 units an hour


Automated Yogurt Press

  • Scope:  Design, spec, build, and install automated yogurt press for Swiss based company
  • Purpose: The metered dispensing of yogurt from bulk storage containers to production line
  • Drives:  Allen-Bradley Servo
  • Controls: Allen-Bradley CompactLogix
  • Rate: Up to 3000 lbs. an hour


            HYDRAULICS               PNEUMATICS                         FEA                      POWER TRANSMISION 

IDI Integrated Distribution Inc. A small, locally owned, Western Michigan Industrial Distributor
Keeping YOUR business moving forward!
Phone: 800.952.5072 | 4000 West River Drive, NE • Comstock Park, MI 49321 |